Pressure washer Pressure washer

Pressure washer

Pressure washer is typically done through an opening called a cleanout, which is an accessible opening present in every plumbing system and designed to allow plumbers to easily "clean out" debris and other clogs. water jet blasting machine consists of a large tank of water, a special high-pressure hose, a special high-strength nozzle, and a cleaning machine with pump unit which pressurizes the water in the hose so that it can spray out of the nozzle at a pressurized rate of up to 40000 psi and a flow rate of 56L/min

High pressure washing machine can be widely used for remove the blockage from the tube pipe with high flow rate up to 500L/min with 400 bar and remove the paint rust in a high efficiency with high pressure up to 3000 bar and combining rotating cleaning head to remove the material from the surface in a quick speed ,it also can be used to remove the road marking removal and rubber removal in the airport .


Available as a skid or trailer unit, Watex pressure washer offer a host of features to provide contractors with enhanced performance. Superior durability, and unsurpassed operating efficiency. Mostly it can be called : Industrial high pressure washer can be used for rust paint removal for metal surface and pipe tube tank kettle and mining industry to use .

What happens when Watex takes the toughest pressure washer in the industry and improves it from end to end?One of the most notable changes is the special water tank and filter system. This integrated design helps extend system life, while larger filters help extend on-site operating time.

We invite you to explore all the enhancements and operating features of the Watex D-Stream.This pump, with its quick-change. In-line fluid end design, has fewer parts for increased operating efficiency and simpler maintenance.

All operating controls, including the pressure compensating by-pass valve and pressure gauge with snubber. Are mounted on a separate accessory manifold, which provides additional protection for these important components.

High pressure washer pump unit

With the operating pressure from 100 bar to 3000 bar, it is ideally suited for a wide variety of cleaning work in the chemical industry, oil and gas industries as well as in the area of ship cleaning.

The sealing water system used prevents leakage, enables an especially high durability of the high-pressure seals and counteracts the ingress of air.

  • Swing-Down manifold for full component access
  • Convert to various pressures in the field with minimal downtime
  • Engine driven charge pump to ensure the fluid end receives water at the correct pressure, regardless of the supply conditions.

1)pump anti vibration technology

  • The pump anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.
  • The one button stabilization technology quickly dampends any pump movement resulting from repositioning the piston. This allows precise positioning of the end hose.
  • With cycle times of up to 29 per minute (at 12MPa). pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.
  • The hydraulic system developed by an international team ensures precise operation and energy conservation
  • Extra reinforcements in the boom, arm, swing platform and undercarriage increase stability and service life
  • Easily accessible service points and a detachable radiator screen are among the features that make scheduled maintenance more convenient
  • By adopting our new swing brake technology, the pump’s overswing amplitude is reduced by 60%

Versatile and easy control panel for pressure washer

Control system ensure the high stability of the flow rate and continuous high pressure washer and guarantee high volumetric efficiencies at high pressures in a quick speed as well.

It features for waterproof and dust-proof ,the protection level reached to IP 65. Combining pump anti vibration technology ,the pump anti vibration technology reduces vibration during pumping by 50%

1 ) Watex fault self diagnostic technology

Continually monitors more than 200 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.

  • Low water lever shutdown system
  • Water temperature shutdown system
  • Different pressure alarm
  • Oil pressure alarm
  • Oil temperature alarm
  • Water pressure switch to keep the pressure of the water into the pump is eligible

All of the electrical component parts purchased from famous brands

  • All of the electrical components adopts Schneider and some control electrical component parts purchased from Siemens or the similar high quality brands .
  • The drive motor for the diesel engine from Bosch

Diesel engine purchased from famous brand

Diesel engineer as the same important part like the high pressure pump unit,so we purchased all of our diesel engine purchased from Cummins or same quality brands ,you also can tell us the brand of the diesel you need

Stainless steel water tank in 4mm thickness for pressure washer machine

If the water tank made by plastic or normal steel will break and rust easy And break the pump easy and increase the rating of the blockage

  • 250 gallon water tank.
  • Triple 200 gpm filters – the first in its class..
  • Water tank with no pressure filter system by Watex design.
  • Equipped with low water shutdown system and high temperature stop system.
  • Italy mechanical floating valve can eliminate the water hammer effectively
  • Allows for water to de-aerate before entering the pump, extending the life of the parts.
  • Low water level switch to prevent cavitation from water supply problems

High performance filter system for pressure washing machine

  • Three stage filters
  • 1μ standard
  • 304 stainless steel casting cover bear high pressure
  • All of the cover of the casting made by laser welding

Smart fluid end conversion for pressure washer machine

  • Fluid end can change the pressure from lower to the high pressure within 2 mins
  • All of the fluid end made in USA
  • All of the HP kits made in USA
  • Gauge made purchased from Wika

Max strongest chassis for pressure washer machine guarantee long lifespan

  • Dural independent frame system ,diesel and pump mounted on a separate plate
  • Design specially for surface treatment ,easy to transport and hoist
  • The plate has tool box can keep some tools and accessories easy and safe
  • Galvanized processing to meet the long term anticorrosion requirement

Hydraulic reel collection system without compromise for the high pressure tube

  • Torsion accessory can improve the working environment and increase the working efficiency.
  • And extend the lifetime of the high pressure tube
  • All of the high pressure tube /line made in Sweden or USA . combining the hydraulic system it can collect the long soft tube in a good situation
  • And maximize the lifetime of the tube , especially for the sewer and drain cleaning which need long length tube

Industry cleaning application with high pressure washer machine

Pressure washer is a method by which a high pressure stream of water from 100bar to 2800bar used to remove old paint, rust, rubber removal for the airport, chemicals, mining or other heavy build up without causing damage to the surface below it.

This method is perfect for internal and external surfaces because the spray gun operator is able to access those “hard to reach” areas. Besides, due to its strong water spray, the user can keep a safe distance from the surface being cleaned.

One of the major differences between water blasting and other cleaning abrasives is the ability to contain, capture, filter and reuse the water. This eliminates waste water and contaminants after the cleaning.

Decoating of a wide variety of materials and surfaces

High pressure water jetting technology from Watex form the ideal basis for gentle decoating of a wide variety of substrates. Many years of experience in all areas of high pressure technology flow into the design of suitable tools and the correct interaction of water pressure, quantity and working angle ensure perfect results.

Decoring for highest quality requirements for the casting parts

Decoring products ensures maximum cleanliness and quality. Remove residues thoroughly, even on parts that are difficult to access.

Derusting to protect against rust formation

De-rusting with high pressure water is a process that is used whenever components and workpieces need to be protected against rust formation.

Descaling to remove impurities from iron oxide

The descaling of steel has a decisive influence on the quality of the end product. It is therefore of enormous importance to control the process reli

  • Water blasting paint removal2024-6-2

    Water blasting paint removal for tank ,vessel , boat , giant ship is become more and more popular

  • Water Jet cleaner2024-4-8

    Water jet cleaner consists of high pressure triplex plunger pump that generates high pressure ,which is used to remove mold, grime, dust, mud and dirt from of various objects such as vehicles, buildings, concrete road surfaces .

  • High pressure water machine2024-6-2

    High pressure water machine can be used on sewer, pavements or on walls for chewing gum removal

  • Water blast machine2024-4-15

    High pressure water blast machine is designed to deliver optimal productivity, undeniable reliability, and enhanced performance to tackle the most demanding applications

  • Hydro blasting rig platform2024-4-8

    Hydro blasting for rig platform minimizes waste, does not bring any other activities removes salt and other residues from surfaces

  • Hydroblasting machine 40000 psi will be the good option for paint rust removal2024-6-5

    Hydroblasting machine 40000 psi three pistons pump are low-maintenance solutions for high applications such as ship cleaning for paint removal

  • High pressure water tank cleaning machine2024-6-2

    Tank and vessel cleaning requires a specific type of equipment, generally known as Cleaning nozzle and ultra high pressure water tank cleaning machine.

  • Hydroblasting equipment2024-6-11

    Hydroblasting equipment is the method of using a high-pressure stream of water to clean the inside surfaces of plumbing pipes

error: Content is protected !!