Water Jet cleaning machine Water Jet cleaning machine

Water Jet cleaning machine

water jet cleaning machine is an appropriate solution when clogs cannot be removed through traditional snaking, such as in the presence of stubborn roots that have found their way into your sewer lines. Hydro blasting cleaning machine is also required before Pipe Lining because any debris present in the existing pipe may cause the epoxy lining resin to be malformed and / or prevent it from bonding correctly to the existing pipe.

waterjet cleaning machine can be widely used for remove the blockage from the tube pipe with high flow rate up to 200L/min with 400 bar and remove the paint rust in a high efficiency with high pressure up to 3000 bar and combining rotating cleaning head to remove the material from the surface in a quick speed ,it also can be used to remove the road marking removal and rubber removal in the airport mechanical motor grader with German Bosch fuel injection leads to low exhaust emissions.


Water jet cleaning machine is used for paint protective coating and rust removal , it also can be used for pipe , heat exchanger an oil tank and chemical vessel cleaning visa a 3D jetting nozzle .

The new stainless water tank and filter system helps extend system life, double safety vales guarantee the operators safe during operate equipment .

What happens when Watex takes the toughest water jet cleaning machine in the industry and improves it from end to end? You get an D-stream duty unit with enhanced performance, superior durability, and unsurpassed operating efficiency.

The D-stream units deliver a host of engineered improvements. One of the most notable changes is the special water tank and filter system. This  integrated design helps extend system life, while larger filters help extend on-site operating time.

You still have a choice of skid or trailer mounted units. And you still have Watex’s exceptional customer service team and service facilities to support you day and night.

Powerful performance and undeniable reliability are just two reasons the new D-Stream Series water blast is the clear choice for your high-flow applications.

With operating pressures from 300bar to 3000 bar, it is ideally suited for a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning.

Water Jet cleaning machine pump unit

  •  Swing-Down manifold for full component access
  •  Convert to various pressures in the field with minimal downtime
  • Engine driven charge pump to ensure the fluid end receives water at the correct pressure, regardless of the supply conditions.
  • With the operating pressure from 200 bar to 3000 bar, it is ideally suited for a wide variety of cleaning work.
  • The sealing water system used prevents leakage, enables an especially high durability of the high-pressure seals and counteracts the ingress of air.

1)pump anti vibration technology

The pump anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.

The one button stabilization technology quickly dampen any pump movement resulting from repositioning the piston. This allows precise positioning of the end hose.

Pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10% with water jet cleaning machine.

2) Anti over-swing technology

  •  By adopting our new swing brake technology, the pump’s over-swing amplitude is reduced by 60%
  •  The hydraulic system developed by an international team ensures precise operation and energy conservation
  • Extra reinforcements in the boom, arm, swing platform and undercarriage increase stability and service life
  • Easily accessible service points and a detachable radiator screen are among the features that make scheduled maintenance more convenient

Versatile and easy control panel

German made control system ensure the high stability of the flow rate and continuous working and guarantee high volumetric efficiencies .

It features for waterproof and dust-proof ,the protection level reached to IP 65. Combining pump anti vibration technology, it can reduce vibration during pumping by 50% .

1 ) Watex fault self diagnostic technology

Continually monitors more than 20 aspects of the system during operation. Faults are displayed on the monitor.

  • Low water lever shutdown system
  • Water temperature shutdown system
  • Different pressure alarm
  • Oil pressure alarm
  • Oil temperature alarm
  • Water pressure switch to keep the pressure of the water into the pump is eligible

All of the electrical component parts from famous brand

  • All of the electrical components adopts Schneider and some control electrical component parts purchased from Siemens or the similar high quality brands .
  • The drive motor for the diesel engine from Bosch
  • They are according with CE and US standard .

Diesel engine purchased from famous brand ,Watex also supply OEM service

  • Diesel engineer as the same important parts like high pressure unit ,so we purchased all of our diesel engine purchased from Cummins or same quality brands
  • Cummins engine oil ,every 1000 hours to update
  • Service network all of the world
  • Max rotating speed 1900 rpm
  • European ⅢA Emission standard
  • Advanced fuel injection technology ,heat efficiency 9.8MJ/KWH

304 stainless steel water tank in 4mm thickness for water jet cleaning machine

If the water tank made by plastic or normal steel will break and rust easy and break the pump easy and increase the rating of the blockage

  • 250 gallon water tank.
  • Triple 200 gpm filters – the first in its class..
  • Water tank with no pressure filter system by Watex design.
  • Equipped with low water shutdown system and high temperature stop system.
  • Italy mechanical floating valve can eliminate the water hammer effectively
  • Allows for water to de-aerate before entering the pump, extending the life of the parts.
  • Low water level switch to prevent cavitation from water supply problems
water jet cleaning machine

High performance filter system for the water jet cleaning machine

  • Three stage filters
  • 1μ standard
  • 304 stainless steel casting cover bear high pressure

Smart fluid end system for the water jet cleaning machine

  • Pump head conversion can change from lower pressure to it’s max pressure within 2 mins
  • All of the fluid end made in USA
  • Lower spare parts thanks to the integrated design of the piston

Max strongest chassis for water jet cleaning machine guarantee long lifespan of the waterjetting machine

  • Double independent frame system ,diesel and pump mounted on a separate plate
  • Design specially for surface treatment ,easy to transport and hoist
  • The plate has tool box can keep some tools and accessories easy and safe
  • Galvanized processing to meet the long term anti-corrosion requirement

Hydraulic reel collection system without compromise as option

  • Torsion accessory can improve the working environment and increase the working efficiency and extend the lifetime of the high pressure tube
  • All of the high pressure tube /line made in Sweden or USA , combining the hydraulic system it can collect the long soft tube in a good situation
  • And maximize the lifetime of the tube ,especially for the sewer and drain cleaning which need long length tube

Industry cleaning application with water jet cleaning equipment

At present ,water jet cleaning machine is widely use for sewer and drain cleaning to get away of the blockage . It also can be used for jetting rust and paint removal in the industry of ship hull and oil tank cleaning .

Hydro demolition to keep the steel frame then make the new concrete via a hydrodemolition robot. It is more popular in the building industry like bridge widen ,besides ,road marking removal ,it also can be used for rubber removal in the airport with water jet cleaning machine.

Surface cleaning

Cleaning surfaces is a popular task with water jetting machine.All the better that the powerful solutions from Watex is able to handle this chore, saving time thanks to their performance and achieving optimal results.

Cleaning of containers, tanks and vessels

Tanks and vessels of all shapes and sizes often require tailored cleaning solutions. We develop solutions to ensure that vessels and tanks are cleaned optimally and that the quality standards in your production process remain unchanged.

De-burring for high precision parts

Removing burrs safely and precisely after the manufacturing process is an ideal field of application for waterjet technology. A perfectly matched system of high-pressure pump and water tool ensures precise, reproducible results.

De-coating of a wide variety of materials and surfaces

High pressure water jetting technology from Watex form the ideal basis for gentle de-coating of a wide variety of substrates. Many years of experience in all areas of high pressure technology flow into the design of suitable tools and the correct interaction of water pressure, quantity and working angle ensure perfect results.

De-coring for highest quality requirements for the casting parts

De-coring products ensures maximum cleanliness and quality. Remove residues thoroughly, even on parts that are difficult to access.

  • Hydrojet machine2024-6-13

    Hydrojet machine is used to clean or remove residues for surface preparation,this equipment uses water …

  • What is waterblasting ?2024-6-3

    Waterblasting is a form of high pressure water cleaning […]

  • High pressure water blaster2024-6-6

    High pressure water blaster can be used for pipe , ship, tank , vessel cleaning from 100 bar to 3000 bar via utilizing the latest water blasting

  • High pressure water jet cleaner2024-6-2

    High pressure water jet cleaner adopts high pressure water pass through the small hole or orifice of the jet nozzle from water jet pump

  • Ultra high pressure washer2024-6-3

    Ultra high pressure washer is the preferred method on projects do not need sand for surface preparation

  • High pressure water jetting machine2024-6-3

    Ultra high pressure water jetting machine is the preferred method on projects where do not need large amounts of abrasives must be collected and disposed

  • Hydro blasting rig platform2024-4-8

    Hydro blasting for rig platform minimizes waste, does not bring any other activities removes salt and other residues from surfaces

  • High pressure water blasting equipment2024-4-8

    Ultra high pressure water blasting equipment is a technique for cleaning external surfaces. It relies entirely on the sheer force of water from a pressurized source to achieve the desired cleaning

error: Content is protected !!